LO2688 - Wholesale Iron Earrings Matte Gold & Gold Women Top Grade Crystal Clear
Iron is by mass the most common element on Earth, forming much of Earth's outer and inner core. It is the fourth most common element in the Earth's crust. Pure iron is relatively soft, but is unobtainable by smelting. The material is significantly hardened and strengthened by impurities, in particular carbon, from the smelting process. A certain proportion of carbon (between 0.002% and 2.1%) produces steel, which may be up to 1000 times harder than pure iron.
Plating:Galvanic Plating, Two-Tone
Galvanic Plating is a process that uses electric currents applied to two opposite poles (negative & positive) in a tank of solution which contains the dissolved material of the coating. The product is attached to the negative pole and powered with a negative charge, while the metal dissolved in the solution is powered with a positive charge. The product then attracts the positive-charged metal in the solution, and thus, creating a thin coating of the desired material.
Two-Tone is when a piece of jewelry has two types/colors of plating.
Finishes:Epoxy, Matte Gold
Epoxy is a tough and resistant thermosetting synthetic resin that contains epoxy groups. It is strongly resistant to corrosive chemical heat, and ultraviolet light, and is widely used as surface coatings, laminates, and adhesives.
Matte Gold is a dull and frosted gold finish that can hide natural wear/ scratch, and be used in jewelry designs to give them a sleek and exquisite feel.
Center Stone Type:Synthetic
Synthetic stones are created artificially in a factory or laboratory, but have the same physical, chemical and optical characteristics as their natural counterparts. These stones usually have high luster, and is difficult to tell the difference from natural stones with the naked eye.
Center Stone Name:Rhinestone
Center Stone Color:Clear
Center Stone Size:5(mm)